§ 24-33-5-1206-3

(1) Fire suppression contractors shall design and install fire suppression systems in accordance with the applicable standards adopted by the administrator by rule, manufacturer's specifications, and applicable local codes and ordinances. In adopting standards, the administrator may consider and adopt the standards of the national fire protection association and shall adopt, by January 1, 2015, a separate set of design and installation standards and a separate registration category applicable only to residential fire suppression systems.(2) The contractor shall furnish the user with operating instructions for all equipment installed, together with as-built diagrams of the final installation.(3) Contractor inspections and tests, where required, shall be conducted by qualified personnel or certified fire safety inspectors and in compliance with applicable standards adopted by the administrator. Complete records shall be kept of the tests and operations of each system. The records shall be available for examination by the local certified fire safety inspector or the fire suppression administrator.Amended by 2014 Ch. 205,§ 7, eff. 5/15/2014.L. 90: Entire section added, p.

cords shall be available for examination by the local certified fire safety inspector or the fire suppression administrator.Amended by 2014 Ch. 205,§ 7, eff. 5/15/2014.L. 90: Entire section added, p. 1214, § 2, effective May 18. L. 2014: (1) amended, (HB 14-1221), ch. 205, p. 755, § 7, effective May 15.Section 24-33.5-1209 (2) provides for the repeal of this section, effective September 1, 2026.